Valvcon
Valvcon™ electric actuators provide efficient, reliable service and combine the proven performance of the industry’s most rugged platform with the widest variety of electronic control options.
Electric actuator solutions from Valvcon™ range from on-off duty, to modulating, proportional control, and two-wire network operation.
- V-Series Actuator - Industrial duty electric actuators
- ADC Actuator - Back-up powered electric actuators
- LC Actuator - Low cost electric actuators
- Q Series - Oil field remote duty electric actuators
- I Series - Network electric actuators
Valvcon™ is a leader in the design and manufacture of compact, reliable electronically controlled electric actuators for valves and dampers.
V-Series
Quarter-Turn Actuators Built for Hard Work
Highly efficient, compact, and rugged (NEMA4, 4X, 7&9)
Up to 3000 inch pounds (250 ft. /lbs.) of breakaway torque
On-off duty, modulating, proportional, or two wire network control
Hardened steel gears throughout, with manual override
ISO5211 mounting interfaces and visual position indicator
Easy access to cams and switches
75% duty cycle, thermal overload cut-out, fuse protection for inputs and outputs
Control package features:
Simple digital set up for 4-20mA, 0-10VDC, 0-135ohms
Auto calibration
Switch selectable input control signal type position feedback signal type, and signal fail position push button CW/CCW control
Adjustable dead band and speed control
Locked output stall protection
Reverse acting and split ranging without any wiring change
Options and accessories:
Analog control
Isolation/relay control
Holding brake
Heater
Auxiliary switches
CSA certification
Click here for product brochure
Request More Information
ADC Series
ADC Series available features:
Internal rechargeable back-up power pack
Can provide up to 10 complete cycles on internal power
Power pack is compact and fits easily into the standard enclosures
No hard-wiring or other complex operations required
Can be activated by power loss or signal from an external sensor
Long battery life – up to 5 years
Visual charging and full charge indication on board
Sleep mode preserves back-up power for extended outage situations
Push button CW/CCW on back-up power
Highly efficient, compact, rugged (NEMA4, 4X, 7&9)
Up to 3000 inch pounds of torque
On-off duty, modulating or proportional control
Hardened steel gears throughout
ISO5211 mounting interfaces and visual position indicator
80% duty cycle, thermal overload protection and up to 30 starts per minute
Applications
Applications
=
Request More Information
LC Series
Simple, reliable, high cycle life
Break-away torque to 600 inch pounds
Uni-directional 24VAC, 115VAC or 230VAC
Reversing 12VDC, 24VDC, 24VAC, 115VAC & 230VAC
Die cast, powder coated, zinc alloy base
UV resistant composite cover for weatherproof NEMA 4, 4X applications
Male or female output with ISO 5211 mounting pattern
Low maintenance, permanently lubricated
Highly efficient, hardened cut steel spur gears throughout
Compact, low profile package – 4.73”X 5.05”X 5.95”, 6.0 lbs.
Position indicator and override available on reversing models
On/Off service options include:
Heater
Auxiliary switches
Three position/center-off and timer control
Request More Information
I Series
Based on the proven and rugged V Series platform for AC applications. Network choices include:
AS-Interface™ – On/Off applications for up to 31 devices via unshielded 2-wire.
LonWorks™ – Lon Mark 8110 Compliant for On/Off applications.
DeviceNet™ – CAN technology for up to 63 devices via 4-wire trunk network.
Profibus-DB™ – 4-wire control, 32 devices via gateway slave to Profibus DCS/PLC’s.
Modbus™ - 4-wire control, 32 devices via gateway slave to Modbus DCS/PLC’s.
Foundation Fieldbus™ – via internal I/O module for up to 32 devices per network.
Features include:
Highly efficient, compact, rugged (NEMA4, 4X, 7&9)
Up to 3000 inch pounds of torque.
Hardened steel gears throughout with manual override
ISO5211 mounting interfaces and visual position indicator
75% duty cycle, thermal overload cut-out, fuse protection for inputs and outputs
Push button CW/CCW control,
Options and accessories:
Holding brake
Heater
Auxiliary switches
Request More Information
Q Series
Oil Field Service and Remote Applications
Designed for low current draw, remote solar or battery applications
50mA idle current, 1.1 Amp maximum running current
600 inch pounds torque
Two auxiliary switches
12VDC or 24VDC input power with LED voltage input indicator
Highly efficient, compact, rugged (NEMA4, 4X, 7&9)
On-off duty, stop in place when power is removed
Low maintenance, permanently lubricated
Hardened steel gears throughout
ISO5211 mounting interfaces and visual position indicator
80% duty cycle, thermal overload protection and up to 10 starts per minute
CSA Certification
Options include:
Position indicator
Manual override
Holding brake
Declutching hand wheel
Request More Information
Box 187
1018 Prescott Dr Unit #2
NEW